Which harness do you need?
Each hydraulic wing plow is controlled from inside the cab of your machine. This requires a wiring harness and controller. Some loaders have controllers built into the joysticks while others need to add it.
Read below to learn which harness is right for your machine. As always, feel free to reach out to us if you are unsure or would like assistance finding the best option for your machine!
Harness Types:
-
Solenoid Harness
CLICK HEREThe lower section of the plow side harnesses by Storm Solutions Plus. Two are required per plow.
-
8 Pin Harness
CLICK HEREAn 8 pin plug as shown above is most common on CAT compact wheel loaders from Cat 904 up to Cat 920. Click below if this is what you need.
-
14 Pin Harness
CLICK HEREThe most common plug. This will be found on most skid steers and some compact wheel loaders but there are some pinout variations by brand. Click below for the different brand and pinout options
-
4 Pin Harness
CLICK HEREThe 4 pin connector is the style used if your machine does not have any built in 8 pin or 14 pin plug. This harness is hard wired into your machine and the controls are mounted somewhere in the cab.
